It is used to remove heavy scales, discoloration, annealing colours, rust particles near weld, and welding affected area by heat without grinding or wire brushing or buffing. It helps in detecting pinholes after welding.
Details will be uploading soon!!
Technical Specification
- Remove dirt and oil using brush weld area with a steel wire brush
- Apply BrighTex P2 Gel on the weld seams and surrounding areas with a nylon plastic brush.
- Leave the BrighTex P2 on the weld seams areas for 10-15 minutes depending upon the thickness of oxide scale.
- Use pressurised water Jet Spray or wipe the weld seam lightly with plastic scrubber & rinse the surface thoroughly with water.
- Apply Brightex Passivation (STA on the surface area and leave it for about 15 minutes. This will prevent further contamination and corrosion.
- Rinse the surface area thoroughly with water and allow it to dry.
